diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 007e9396d0a2492cd2d6e17d42f359655dfe0b5e..0000000000000000000000000000000000000000
--- a/INSTALL
+++ /dev/null
@@ -1,370 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
-Inc.
-
- Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved. This file is offered as-is,
-without warranty of any kind.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package. Some packages provide this
-`INSTALL' file but do not implement all of the features documented
-below. The lack of an optional feature in a given package is not
-necessarily a bug. More recommendations for GNU packages can be found
-in *note Makefile Conventions: (standards)Makefile Conventions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
- The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package, generally using the just-built uninstalled binaries.
-
- 4. Type `make install' to install the programs and any data files and
- documentation. When installing into a prefix owned by root, it is
- recommended that the package be configured and built as a regular
- user, and only the `make install' phase executed with root
- privileges.
-
- 5. Optionally, type `make installcheck' to repeat any self-tests, but
- this time using the binaries in their final installed location.
- This target does not install anything. Running this target as a
- regular user, particularly if the prior `make install' required
- root privileges, verifies that the installation completed
- correctly.
-
- 6. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 7. Often, you can also type `make uninstall' to remove the installed
- files again. In practice, not all packages have tested that
- uninstallation works correctly, even though it is required by the
- GNU Coding Standards.
-
- 8. Some packages, particularly those that use Automake, provide `make
- distcheck', which can by used by developers to test that all other
- targets like `make install' and `make uninstall' work correctly.
- This target is generally not run by end users.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'. This
-is known as a "VPATH" build.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX', where PREFIX must be an
-absolute file name.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them. In general, the
-default for these options is expressed in terms of `${prefix}', so that
-specifying just `--prefix' will affect all of the other directory
-specifications that were not explicitly provided.
-
- The most portable way to affect installation locations is to pass the
-correct locations to `configure'; however, many packages provide one or
-both of the following shortcuts of passing variable assignments to the
-`make install' command line to change installation locations without
-having to reconfigure or recompile.
-
- The first method involves providing an override variable for each
-affected directory. For example, `make install
-prefix=/alternate/directory' will choose an alternate location for all
-directory configuration variables that were expressed in terms of
-`${prefix}'. Any directories that were specified during `configure',
-but not in terms of `${prefix}', must each be overridden at install
-time for the entire installation to be relocated. The approach of
-makefile variable overrides for each directory variable is required by
-the GNU Coding Standards, and ideally causes no recompilation.
-However, some platforms have known limitations with the semantics of
-shared libraries that end up requiring recompilation when using this
-method, particularly noticeable in packages that use GNU Libtool.
-
- The second method involves providing the `DESTDIR' variable. For
-example, `make install DESTDIR=/alternate/directory' will prepend
-`/alternate/directory' before all installation names. The approach of
-`DESTDIR' overrides is not required by the GNU Coding Standards, and
-does not work on platforms that have drive letters. On the other hand,
-it does better at avoiding recompilation issues, and works well even
-when some directory options were not specified in terms of `${prefix}'
-at `configure' time.
-
-Optional Features
-=================
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
- Some packages offer the ability to configure how verbose the
-execution of `make' will be. For these packages, running `./configure
---enable-silent-rules' sets the default to minimal output, which can be
-overridden with `make V=1'; while running `./configure
---disable-silent-rules' sets the default to verbose, which can be
-overridden with `make V=0'.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- HP-UX `make' updates targets which have the same time stamps as
-their prerequisites, which makes it generally unusable when shipped
-generated files such as `configure' are involved. Use GNU `make'
-instead.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
- On Solaris, don't put `/usr/ucb' early in your `PATH'. This
-directory contains several dysfunctional programs; working variants of
-these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
-in your `PATH', put it _after_ `/usr/bin'.
-
- On Haiku, software installed for all users goes in `/boot/common',
-not `/usr/local'. It is recommended to use the following options:
-
- ./configure --prefix=/boot/common
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS
- KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf limitation. Until the limitation is lifted, you can use
-this workaround:
-
- CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
diff --git a/autogen.sh b/autogen.sh
deleted file mode 100755
index 5bce9bab38baa893f0a2e03a919fbf353418439f..0000000000000000000000000000000000000000
--- a/autogen.sh
+++ /dev/null
@@ -1,1578 +0,0 @@
-#!/bin/sh
-# a u t o g e n . s h
-#
-# Copyright (c) 2005-2009 United States Government as represented by
-# the U.S. Army Research Laboratory.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# 2. Redistributions in binary form must reproduce the above
-# copyright notice, this list of conditions and the following
-# disclaimer in the documentation and/or other materials provided
-# with the distribution.
-#
-# 3. The name of the author may not be used to endorse or promote
-# products derived from this software without specific prior written
-# permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
-# OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
-# GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-###
-#
-# Script for automatically preparing the sources for compilation by
-# performing the myriad of necessary steps. The script attempts to
-# detect proper version support, and outputs warnings about particular
-# systems that have autotool peculiarities.
-#
-# Basically, if everything is set up and installed correctly, the
-# script will validate that minimum versions of the GNU Build System
-# tools are installed, account for several common configuration
-# issues, and then simply run autoreconf for you.
-#
-# If autoreconf fails, which can happen for many valid configurations,
-# this script proceeds to run manual preparation steps effectively
-# providing a POSIX shell script (mostly complete) reimplementation of
-# autoreconf.
-#
-# The AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER
-# environment variables and corresponding _OPTIONS variables (e.g.
-# AUTORECONF_OPTIONS) may be used to override the default automatic
-# detection behaviors. Similarly the _VERSION variables will override
-# the minimum required version numbers.
-#
-# Examples:
-#
-# To obtain help on usage:
-# ./autogen.sh --help
-#
-# To obtain verbose output:
-# ./autogen.sh --verbose
-#
-# To skip autoreconf and prepare manually:
-# AUTORECONF=false ./autogen.sh
-#
-# To verbosely try running with an older (unsupported) autoconf:
-# AUTOCONF_VERSION=2.50 ./autogen.sh --verbose
-#
-# Author:
-# Christopher Sean Morrison <morrison@brlcad.org>
-#
-# Patches:
-# Sebastian Pipping <sebastian@pipping.org>
-#
-######################################################################
-
-# set to minimum acceptable version of autoconf
-if [ "x$AUTOCONF_VERSION" = "x" ] ; then
- AUTOCONF_VERSION=2.52
-fi
-# set to minimum acceptable version of automake
-if [ "x$AUTOMAKE_VERSION" = "x" ] ; then
- AUTOMAKE_VERSION=1.6.0
-fi
-# set to minimum acceptable version of libtool
-if [ "x$LIBTOOL_VERSION" = "x" ] ; then
- LIBTOOL_VERSION=1.4.2
-fi
-
-
-##################
-# ident function #
-##################
-ident ( ) {
- # extract copyright from header
- __copyright="`grep Copyright $AUTOGEN_SH | head -${HEAD_N}1 | awk '{print $4}'`"
- if [ "x$__copyright" = "x" ] ; then
- __copyright="`date +%Y`"
- fi
-
- # extract version from CVS Id string
- __id="$Id: autogen.sh 33925 2009-03-01 23:27:06Z brlcad $"
- __version="`echo $__id | sed 's/.*\([0-9][0-9][0-9][0-9]\)[-\/]\([0-9][0-9]\)[-\/]\([0-9][0-9]\).*/\1\2\3/'`"
- if [ "x$__version" = "x" ] ; then
- __version=""
- fi
-
- echo "autogen.sh build preparation script by Christopher Sean Morrison"
- echo " + config.guess download patch by Sebastian Pipping (2008-12-03)"
- echo "revised 3-clause BSD-style license, copyright (c) $__copyright"
- echo "script version $__version, ISO/IEC 9945 POSIX shell script"
-}
-
-
-##################
-# USAGE FUNCTION #
-##################
-usage ( ) {
- echo "Usage: $AUTOGEN_SH [-h|--help] [-v|--verbose] [-q|--quiet] [-d|--download] [--version]"
- echo " --help Help on $NAME_OF_AUTOGEN usage"
- echo " --verbose Verbose progress output"
- echo " --quiet Quiet suppressed progress output"
- echo " --download Download the latest config.guess from gnulib"
- echo " --version Only perform GNU Build System version checks"
- echo
- echo "Description: This script will validate that minimum versions of the"
- echo "GNU Build System tools are installed and then run autoreconf for you."
- echo "Should autoreconf fail, manual preparation steps will be run"
- echo "potentially accounting for several common preparation issues. The"
-
- echo "AUTORECONF, AUTOCONF, AUTOMAKE, LIBTOOLIZE, ACLOCAL, AUTOHEADER,"
- echo "PROJECT, & CONFIGURE environment variables and corresponding _OPTIONS"
- echo "variables (e.g. AUTORECONF_OPTIONS) may be used to override the"
- echo "default automatic detection behavior."
- echo
-
- ident
-
- return 0
-}
-
-
-##########################
-# VERSION_ERROR FUNCTION #
-##########################
-version_error ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided a version"
- exit 1
- fi
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version_error was not provided an application name"
- exit 1
- fi
- $ECHO
- $ECHO "ERROR: To prepare the ${PROJECT} build system from scratch,"
- $ECHO " at least version $1 of $2 must be installed."
- $ECHO
- $ECHO "$NAME_OF_AUTOGEN does not need to be run on the same machine that will"
- $ECHO "run configure or make. Either the GNU Autotools will need to be installed"
- $ECHO "or upgraded on this system, or $NAME_OF_AUTOGEN must be run on the source"
- $ECHO "code on another system and then transferred to here. -- Cheers!"
- $ECHO
-}
-
-##########################
-# VERSION_CHECK FUNCTION #
-##########################
-version_check ( ) {
- if [ "x$1" = "x" ] ; then
- echo "INTERNAL ERROR: version_check was not provided a minimum version"
- exit 1
- fi
- _min="$1"
- if [ "x$2" = "x" ] ; then
- echo "INTERNAL ERROR: version check was not provided a comparison version"
- exit 1
- fi
- _cur="$2"
-
- # needed to handle versions like 1.10 and 1.4-p6
- _min="`echo ${_min}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
- _cur="`echo ${_cur}. | sed 's/[^0-9]/./g' | sed 's/\.\././g'`"
-
- _min_major="`echo $_min | cut -d. -f1`"
- _min_minor="`echo $_min | cut -d. -f2`"
- _min_patch="`echo $_min | cut -d. -f3`"
-
- _cur_major="`echo $_cur | cut -d. -f1`"
- _cur_minor="`echo $_cur | cut -d. -f2`"
- _cur_patch="`echo $_cur | cut -d. -f3`"
-
- if [ "x$_min_major" = "x" ] ; then
- _min_major=0
- fi
- if [ "x$_min_minor" = "x" ] ; then
- _min_minor=0
- fi
- if [ "x$_min_patch" = "x" ] ; then
- _min_patch=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_major=0
- fi
- if [ "x$_cur_minor" = "x" ] ; then
- _cur_minor=0
- fi
- if [ "x$_cur_patch" = "x" ] ; then
- _cur_patch=0
- fi
-
- $VERBOSE_ECHO "Checking if ${_cur_major}.${_cur_minor}.${_cur_patch} is greater than ${_min_major}.${_min_minor}.${_min_patch}"
-
- if [ $_min_major -lt $_cur_major ] ; then
- return 0
- elif [ $_min_major -eq $_cur_major ] ; then
- if [ $_min_minor -lt $_cur_minor ] ; then
- return 0
- elif [ $_min_minor -eq $_cur_minor ] ; then
- if [ $_min_patch -lt $_cur_patch ] ; then
- return 0
- elif [ $_min_patch -eq $_cur_patch ] ; then
- return 0
- fi
- fi
- fi
- return 1
-}
-
-
-######################################
-# LOCATE_CONFIGURE_TEMPLATE FUNCTION #
-######################################
-locate_configure_template ( ) {
- _pwd="`pwd`"
- if test -f "./configure.ac" ; then
- echo "./configure.ac"
- elif test -f "./configure.in" ; then
- echo "./configure.in"
- elif test -f "$_pwd/configure.ac" ; then
- echo "$_pwd/configure.ac"
- elif test -f "$_pwd/configure.in" ; then
- echo "$_pwd/configure.in"
- elif test -f "$PATH_TO_AUTOGEN/configure.ac" ; then
- echo "$PATH_TO_AUTOGEN/configure.ac"
- elif test -f "$PATH_TO_AUTOGEN/configure.in" ; then
- echo "$PATH_TO_AUTOGEN/configure.in"
- fi
-}
-
-
-##################
-# argument check #
-##################
-ARGS="$*"
-PATH_TO_AUTOGEN="`dirname $0`"
-NAME_OF_AUTOGEN="`basename $0`"
-AUTOGEN_SH="$PATH_TO_AUTOGEN/$NAME_OF_AUTOGEN"
-
-LIBTOOL_M4="${PATH_TO_AUTOGEN}/misc/libtool.m4"
-
-if [ "x$HELP" = "x" ] ; then
- HELP=no
-fi
-if [ "x$QUIET" = "x" ] ; then
- QUIET=no
-fi
-if [ "x$VERBOSE" = "x" ] ; then
- VERBOSE=no
-fi
-if [ "x$VERSION_ONLY" = "x" ] ; then
- VERSION_ONLY=no
-fi
-if [ "x$DOWNLOAD" = "x" ] ; then
- DOWNLOAD=no
-fi
-if [ "x$AUTORECONF_OPTIONS" = "x" ] ; then
- AUTORECONF_OPTIONS="-i -f"
-fi
-if [ "x$AUTOCONF_OPTIONS" = "x" ] ; then
- AUTOCONF_OPTIONS="-f"
-fi
-if [ "x$AUTOMAKE_OPTIONS" = "x" ] ; then
- AUTOMAKE_OPTIONS="-a -c -f"
-fi
-ALT_AUTOMAKE_OPTIONS="-a -c"
-if [ "x$LIBTOOLIZE_OPTIONS" = "x" ] ; then
- LIBTOOLIZE_OPTIONS="--automake -c -f"
-fi
-ALT_LIBTOOLIZE_OPTIONS="--automake --copy --force"
-if [ "x$ACLOCAL_OPTIONS" = "x" ] ; then
- ACLOCAL_OPTIONS=""
-fi
-if [ "x$AUTOHEADER_OPTIONS" = "x" ] ; then
- AUTOHEADER_OPTIONS=""
-fi
-if [ "x$CONFIG_GUESS_URL" = "x" ] ; then
- CONFIG_GUESS_URL="http://git.savannah.gnu.org/gitweb/?p=gnulib.git;a=blob_plain;f=build-aux/config.guess;hb=HEAD"
-fi
-for arg in $ARGS ; do
- case "x$arg" in
- x--help) HELP=yes ;;
- x-[hH]) HELP=yes ;;
- x--quiet) QUIET=yes ;;
- x-[qQ]) QUIET=yes ;;
- x--verbose) VERBOSE=yes ;;
- x-[dD]) DOWNLOAD=yes ;;
- x--download) DOWNLOAD=yes ;;
- x-[vV]) VERBOSE=yes ;;
- x--version) VERSION_ONLY=yes ;;
- *)
- echo "Unknown option: $arg"
- echo
- usage
- exit 1
- ;;
- esac
-done
-
-
-#####################
-# environment check #
-#####################
-
-# sanity check before recursions potentially begin
-if [ ! -f "$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: $AUTOGEN_SH does not exist"
- if [ ! "x$0" = "x$AUTOGEN_SH" ] ; then
- echo "INTERNAL ERROR: dirname/basename inconsistency: $0 != $AUTOGEN_SH"
- fi
- exit 1
-fi
-
-# force locale setting to C so things like date output as expected
-LC_ALL=C
-
-# commands that this script expects
-for __cmd in echo head tail pwd ; do
- echo "test" | $__cmd > /dev/null 2>&1
- if [ $? != 0 ] ; then
- echo "INTERNAL ERROR: '${__cmd}' command is required"
- exit 2
- fi
-done
-echo "test" | grep "test" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: grep command is required"
- exit 1
-fi
-echo "test" | sed "s/test/test/" > /dev/null 2>&1
-if test ! x$? = x0 ; then
- echo "INTERNAL ERROR: sed command is required"
- exit 1
-fi
-
-
-# determine the behavior of echo
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
- *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T=' ' ;;
- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
- *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-# determine the behavior of head
-case "x`echo 'head' | head -n 1 2>&1`" in
- *xhead*) HEAD_N="n " ;;
- *) HEAD_N="" ;;
-esac
-
-# determine the behavior of tail
-case "x`echo 'tail' | tail -n 1 2>&1`" in
- *xtail*) TAIL_N="n " ;;
- *) TAIL_N="" ;;
-esac
-
-VERBOSE_ECHO=:
-ECHO=:
-if [ "x$QUIET" = "xyes" ] ; then
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output quelled by quiet option. Further output disabled."
- fi
-else
- ECHO=echo
- if [ "x$VERBOSE" = "xyes" ] ; then
- echo "Verbose output enabled"
- VERBOSE_ECHO=echo
- fi
-fi
-
-
-# allow a recursive run to disable further recursions
-if [ "x$RUN_RECURSIVE" = "x" ] ; then
- RUN_RECURSIVE=yes
-fi
-
-
-################################################
-# check for help arg and bypass version checks #
-################################################
-if [ "x`echo $ARGS | sed 's/.*[hH][eE][lL][pP].*/help/'`" = "xhelp" ] ; then
- HELP=yes
-fi
-if [ "x$HELP" = "xyes" ] ; then
- usage
- $ECHO "---"
- $ECHO "Help was requested. No preparation or configuration will be performed."
- exit 0
-fi
-
-
-#######################
-# set up signal traps #
-#######################
-untrap_abnormal ( ) {
- for sig in 1 2 13 15; do
- trap - $sig
- done
-}
-
-# do this cleanup whenever we exit.
-trap '
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
- fi
-
- # restore/delete backup files
- if test "x$PFC_INIT" = "x1" ; then
- recursive_restore
- fi
-' 0
-
-# trap SIGHUP (1), SIGINT (2), SIGPIPE (13), SIGTERM (15)
-for sig in 1 2 13 15; do
- trap '
- $ECHO ""
- $ECHO "Aborting $NAME_OF_AUTOGEN: caught signal '$sig'"
-
- # start from the root
- if test -d "$START_PATH" ; then
- cd "$START_PATH"
- fi
-
- # clean up on abnormal exit
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
-
- if test -f "acinclude.m4.$$.backup" ; then
- $VERBOSE_ECHO "cat acinclude.m4.$$.backup > acinclude.m4"
- chmod u+w acinclude.m4
- cat acinclude.m4.$$.backup > acinclude.m4
-
- $VERBOSE_ECHO "rm -f acinclude.m4.$$.backup"
- rm -f acinclude.m4.$$.backup
- fi
-
- { (exit 1); exit 1; }
-' $sig
-done
-
-
-#############################
-# look for a configure file #
-#############################
-if [ "x$CONFIGURE" = "x" ] ; then
- CONFIGURE="`locate_configure_template`"
- if [ ! "x$CONFIGURE" = "x" ] ; then
- $VERBOSE_ECHO "Found a configure template: $CONFIGURE"
- fi
-else
- $ECHO "Using CONFIGURE environment variable override: $CONFIGURE"
-fi
-if [ "x$CONFIGURE" = "x" ] ; then
- if [ "x$VERSION_ONLY" = "xyes" ] ; then
- CONFIGURE=/dev/null
- else
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
- fi
-fi
-
-####################
-# get project name #
-####################
-if [ "x$PROJECT" = "x" ] ; then
- PROJECT="`grep AC_INIT $CONFIGURE | grep -v '.*#.*AC_INIT' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_INIT(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if [ "x$PROJECT" = "xAC_INIT" ] ; then
- # projects might be using the older/deprecated arg-less AC_INIT .. look for AM_INIT_AUTOMAKE instead
- PROJECT="`grep AM_INIT_AUTOMAKE $CONFIGURE | grep -v '.*#.*AM_INIT_AUTOMAKE' | tail -${TAIL_N}1 | sed 's/^[ ]*AM_INIT_AUTOMAKE(\([^,)]*\).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- fi
- if [ "x$PROJECT" = "xAM_INIT_AUTOMAKE" ] ; then
- PROJECT="project"
- fi
- if [ "x$PROJECT" = "x" ] ; then
- PROJECT="project"
- fi
-else
- $ECHO "Using PROJECT environment variable override: $PROJECT"
-fi
-$ECHO "Preparing the $PROJECT build system...please wait"
-$ECHO
-
-
-########################
-# check for autoreconf #
-########################
-HAVE_AUTORECONF=no
-if [ "x$AUTORECONF" = "x" ] ; then
- for AUTORECONF in autoreconf ; do
- $VERBOSE_ECHO "Checking autoreconf version: $AUTORECONF --version"
- $AUTORECONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- HAVE_AUTORECONF=yes
- break
- fi
- done
-else
- HAVE_AUTORECONF=yes
- $ECHO "Using AUTORECONF environment variable override: $AUTORECONF"
-fi
-
-
-##########################
-# autoconf version check #
-##########################
-_acfound=no
-if [ "x$AUTOCONF" = "x" ] ; then
- for AUTOCONF in autoconf ; do
- $VERBOSE_ECHO "Checking autoconf version: $AUTOCONF --version"
- $AUTOCONF --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _acfound=yes
- break
- fi
- done
-else
- _acfound=yes
- $ECHO "Using AUTOCONF environment variable override: $AUTOCONF"
-fi
-
-_report_error=no
-if [ ! "x$_acfound" = "xyes" ] ; then
- $ECHO "ERROR: Unable to locate GNU Autoconf."
- _report_error=yes
-else
- _version="`$AUTOCONF --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Autoconf version $_version"
- version_check "$AUTOCONF_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOCONF_VERSION" "GNU Autoconf"
- exit 1
-fi
-
-
-##########################
-# automake version check #
-##########################
-_amfound=no
-if [ "x$AUTOMAKE" = "x" ] ; then
- for AUTOMAKE in automake ; do
- $VERBOSE_ECHO "Checking automake version: $AUTOMAKE --version"
- $AUTOMAKE --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- _amfound=yes
- break
- fi
- done
-else
- _amfound=yes
- $ECHO "Using AUTOMAKE environment variable override: $AUTOMAKE"
-fi
-
-
-_report_error=no
-if [ ! "x$_amfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Automake."
- _report_error=yes
-else
- _version="`$AUTOMAKE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Automake version $_version"
- version_check "$AUTOMAKE_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$AUTOMAKE_VERSION" "GNU Automake"
- exit 1
-fi
-
-
-########################
-# check for libtoolize #
-########################
-HAVE_LIBTOOLIZE=yes
-HAVE_ALT_LIBTOOLIZE=no
-_ltfound=no
-if [ "x$LIBTOOLIZE" = "x" ] ; then
- LIBTOOLIZE=libtoolize
- $VERBOSE_ECHO "Checking libtoolize version: $LIBTOOLIZE --version"
- $LIBTOOLIZE --version > /dev/null 2>&1
- if [ ! $? = 0 ] ; then
- HAVE_LIBTOOLIZE=no
- $ECHO
- if [ "x$HAVE_AUTORECONF" = "xno" ] ; then
- $ECHO "Warning: libtoolize does not appear to be available."
- else
- $ECHO "Warning: libtoolize does not appear to be available. This means that"
- $ECHO "the automatic build preparation via autoreconf will probably not work."
- $ECHO "Preparing the build by running each step individually, however, should"
- $ECHO "work and will be done automatically for you if autoreconf fails."
- fi
-
- # look for some alternates
- for tool in glibtoolize libtoolize15 libtoolize14 libtoolize13 ; do
- $VERBOSE_ECHO "Checking libtoolize alternate: $tool --version"
- _glibtoolize="`$tool --version > /dev/null 2>&1`"
- if [ $? = 0 ] ; then
- $VERBOSE_ECHO "Found $tool --version"
- _glti="`which $tool`"
- if [ "x$_glti" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool with which"
- continue;
- fi
- if test ! -f "$_glti" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_glti is not a file"
- continue;
- fi
- _gltidir="`dirname $_glti`"
- if [ "x$_gltidir" = "x" ] ; then
- $VERBOSE_ECHO "Cannot find $tool path with dirname of $_glti"
- continue;
- fi
- if test ! -d "$_gltidir" ; then
- $VERBOSE_ECHO "Cannot use $tool, $_gltidir is not a directory"
- continue;
- fi
- HAVE_ALT_LIBTOOLIZE=yes
- LIBTOOLIZE="$tool"
- $ECHO
- $ECHO "Fortunately, $tool was found which means that your system may simply"
- $ECHO "have a non-standard or incomplete GNU Autotools install. If you have"
- $ECHO "sufficient system access, it may be possible to quell this warning by"
- $ECHO "running:"
- $ECHO
- sudo -V > /dev/null 2>&1
- if [ $? = 0 ] ; then
- $ECHO " sudo ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- else
- $ECHO " ln -s $_glti $_gltidir/libtoolize"
- $ECHO
- $ECHO "Run that as root or with proper permissions to the $_gltidir directory"
- $ECHO
- fi
- _ltfound=yes
- break
- fi
- done
- else
- _ltfound=yes
- fi
-else
- _ltfound=yes
- $ECHO "Using LIBTOOLIZE environment variable override: $LIBTOOLIZE"
-fi
-
-
-############################
-# libtoolize version check #
-############################
-_report_error=no
-if [ ! "x$_ltfound" = "xyes" ] ; then
- $ECHO
- $ECHO "ERROR: Unable to locate GNU Libtool."
- _report_error=yes
-else
- _version="`$LIBTOOLIZE --version | head -${HEAD_N}1 | sed 's/[^0-9]*\([0-9\.][0-9\.]*\)/\1/'`"
- if [ "x$_version" = "x" ] ; then
- _version="0.0.0"
- fi
- $ECHO "Found GNU Libtool version $_version"
- version_check "$LIBTOOL_VERSION" "$_version"
- if [ $? -ne 0 ] ; then
- _report_error=yes
- fi
-fi
-if [ "x$_report_error" = "xyes" ] ; then
- version_error "$LIBTOOL_VERSION" "GNU Libtool"
- exit 1
-fi
-
-
-#####################
-# check for aclocal #
-#####################
-if [ "x$ACLOCAL" = "x" ] ; then
- for ACLOCAL in aclocal ; do
- $VERBOSE_ECHO "Checking aclocal version: $ACLOCAL --version"
- $ACLOCAL --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using ACLOCAL environment variable override: $ACLOCAL"
-fi
-
-
-########################
-# check for autoheader #
-########################
-if [ "x$AUTOHEADER" = "x" ] ; then
- for AUTOHEADER in autoheader ; do
- $VERBOSE_ECHO "Checking autoheader version: $AUTOHEADER --version"
- $AUTOHEADER --version > /dev/null 2>&1
- if [ $? = 0 ] ; then
- break
- fi
- done
-else
- $ECHO "Using AUTOHEADER environment variable override: $AUTOHEADER"
-fi
-
-
-#########################
-# check if version only #
-#########################
-$VERBOSE_ECHO "Checking whether to only output version information"
-if [ "x$VERSION_ONLY" = "xyes" ] ; then
- $ECHO
- ident
- $ECHO "---"
- $ECHO "Version requested. No preparation or configuration will be performed."
- exit 0
-fi
-
-
-#################################
-# PROTECT_FROM_CLOBBER FUNCTION #
-#################################
-protect_from_clobber ( ) {
- PFC_INIT=1
-
- # protect COPYING & INSTALL from overwrite by automake. the
- # automake force option will (inappropriately) ignore the existing
- # contents of a COPYING and/or INSTALL files (depending on the
- # version) instead of just forcing *missing* files like it does
- # for AUTHORS, NEWS, and README. this is broken but extremely
- # prevalent behavior, so we protect against it by keeping a backup
- # of the file that can later be restored.
-
- for file in COPYING INSTALL ; do
- if test -f ${file} ; then
- if test -f ${file}.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "Already backed up ${file} in `pwd`"
- else
- $VERBOSE_ECHO "Backing up ${file} in `pwd`"
- $VERBOSE_ECHO "cp -p ${file} ${file}.$$.protect_from_automake.backup"
- cp -p ${file} ${file}.$$.protect_from_automake.backup
- fi
- fi
- done
-}
-
-
-##############################
-# RECURSIVE_PROTECT FUNCTION #
-##############################
-recursive_protect ( ) {
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories. this function assumes
- # START_PATH was set to pwd before recursion begins so that
- # relative paths work.
-
- # git 'r done, protect COPYING and INSTALL from being clobbered
- protect_from_clobber
-
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
- # $VERBOSE_ECHO "Looking for configure template found `pwd`/$_configure"
-
- # look for subdirs
- # $VERBOSE_ECHO "Looking for subdirs in `pwd`"
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Protecting files from automake in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r done
- recursive_protect
- done
- fi
-} # end of recursive_protect
-
-
-#############################
-# RESTORE_CLOBBERED FUNCION #
-#############################
-restore_clobbered ( ) {
-
- # The automake (and autoreconf by extension) -f/--force-missing
- # option may overwrite COPYING and INSTALL even if they do exist.
- # Here we restore the files if necessary.
-
- spacer=no
-
- for file in COPYING INSTALL ; do
- if test -f ${file}.$$.protect_from_automake.backup ; then
- if test -f ${file} ; then
- # compare entire content, restore if needed
- if test "x`cat ${file}`" != "x`cat ${file}.$$.protect_from_automake.backup`" ; then
- if test "x$spacer" = "xno" ; then
- $VERBOSE_ECHO
- spacer=yes
- fi
- # restore the backup
- $VERBOSE_ECHO "Restoring ${file} from backup (automake -f likely clobbered it)"
- $VERBOSE_ECHO "rm -f ${file}"
- rm -f ${file}
- $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}"
- mv ${file}.$$.protect_from_automake.backup ${file}
- fi # check contents
- elif test -f ${file}.$$.protect_from_automake.backup ; then
- $VERBOSE_ECHO "mv ${file}.$$.protect_from_automake.backup ${file}"
- mv ${file}.$$.protect_from_automake.backup ${file}
- fi # -f ${file}
-
- # just in case
- $VERBOSE_ECHO "rm -f ${file}.$$.protect_from_automake.backup"
- rm -f ${file}.$$.protect_from_automake.backup
- fi # -f ${file}.$$.protect_from_automake.backup
- done
-
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- return
- fi
-
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
- fi
-
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "rm -f \"${_aux_dir}/${file}.backup\""
- rm -f "${_aux_dir}/${file}.backup"
- fi
- done
-} # end of restore_clobbered
-
-
-##############################
-# RECURSIVE_RESTORE FUNCTION #
-##############################
-recursive_restore ( ) {
-
- # restore COPYING and INSTALL from backup if they were clobbered
- # for each directory recursively.
-
- # git 'r undone
- restore_clobbered
-
- # find configure template
- _configure="`locate_configure_template`"
- if [ "x$_configure" = "x" ] ; then
- return
- fi
-
- # look for subdirs
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $_configure | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- CHECK_DIRS=""
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- CHECK_DIRS="$CHECK_DIRS \"`pwd`/$dir\""
- fi
- done
-
- # process subdirs
- if [ ! "x$CHECK_DIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively scanning the following directories:"
- $VERBOSE_ECHO " $CHECK_DIRS"
- for dir in $CHECK_DIRS ; do
- $VERBOSE_ECHO "Checking files for automake damage in $dir"
- cd "$START_PATH"
- eval "cd $dir"
-
- # recursively git 'r undone
- recursive_restore
- done
- fi
-} # end of recursive_restore
-
-
-#######################
-# INITIALIZE FUNCTION #
-#######################
-initialize ( ) {
-
- # this routine performs a variety of directory-specific
- # initializations. some are sanity checks, some are preventive,
- # and some are necessary setup detection.
- #
- # this function sets:
- # CONFIGURE
- # SEARCH_DIRS
- # CONFIG_SUBDIRS
-
- ##################################
- # check for a configure template #
- ##################################
- CONFIGURE="`locate_configure_template`"
- if [ "x$CONFIGURE" = "x" ] ; then
- $ECHO
- $ECHO "A configure.ac or configure.in file could not be located implying"
- $ECHO "that the GNU Build System is at least not used in this directory. In"
- $ECHO "any case, there is nothing to do here without one of those files."
- $ECHO
- $ECHO "ERROR: No configure.in or configure.ac file found in `pwd`"
- exit 1
- fi
-
- #####################
- # detect an aux dir #
- #####################
- _aux_dir="`grep AC_CONFIG_AUX_DIR $CONFIGURE | grep -v '.*#.*AC_CONFIG_AUX_DIR' | tail -${TAIL_N}1 | sed 's/^[ ]*AC_CONFIG_AUX_DIR(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- if test ! -d "$_aux_dir" ; then
- _aux_dir=.
- else
- $VERBOSE_ECHO "Detected auxillary directory: $_aux_dir"
- fi
-
- ################################
- # detect a recursive configure #
- ################################
- CONFIG_SUBDIRS=""
- _det_config_subdirs="`grep AC_CONFIG_SUBDIRS $CONFIGURE | grep -v '.*#.*AC_CONFIG_SUBDIRS' | sed 's/^[ ]*AC_CONFIG_SUBDIRS(\(.*\)).*/\1/' | sed 's/.*\[\(.*\)\].*/\1/'`"
- for dir in $_det_config_subdirs ; do
- if test -d "`pwd`/$dir" ; then
- $VERBOSE_ECHO "Detected recursive configure directory: `pwd`/$dir"
- CONFIG_SUBDIRS="$CONFIG_SUBDIRS `pwd`/$dir"
- fi
- done
-
- ###########################################################
- # make sure certain required files exist for GNU projects #
- ###########################################################
- _marker_found=""
- _marker_found_message_intro='Detected non-GNU marker "'
- _marker_found_message_mid='" in '
- for marker in foreign cygnus ; do
- _marker_found_message=${_marker_found_message_intro}${marker}${_marker_found_message_mid}
- _marker_found="`grep 'AM_INIT_AUTOMAKE.*'${marker} $CONFIGURE`"
- if [ ! "x$_marker_found" = "x" ] ; then
- $VERBOSE_ECHO "${_marker_found_message}`basename \"$CONFIGURE\"`"
- break
- fi
- if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then
- _marker_found="`grep 'AUTOMAKE_OPTIONS.*'${marker} Makefile.am`"
- if [ ! "x$_marker_found" = "x" ] ; then
- $VERBOSE_ECHO "${_marker_found_message}Makefile.am"
- break
- fi
- fi
- done
- if [ "x${_marker_found}" = "x" ] ; then
- _suggest_foreign=no
- for file in AUTHORS COPYING ChangeLog INSTALL NEWS README ; do
- if [ ! -f $file ] ; then
- $VERBOSE_ECHO "Touching ${file} since it does not exist"
- _suggest_foreign=yes
- touch $file
- fi
- done
-
- if [ "x${_suggest_foreign}" = "xyes" ] ; then
- $ECHO
- $ECHO "Warning: Several files expected of projects that conform to the GNU"
- $ECHO "coding standards were not found. The files were automatically added"
- $ECHO "for you since you do not have a 'foreign' declaration specified."
- $ECHO
- $ECHO "Considered adding 'foreign' to AM_INIT_AUTOMAKE in `basename \"$CONFIGURE\"`"
- if test -f "`dirname \"$CONFIGURE\"/Makefile.am`" ; then
- $ECHO "or to AUTOMAKE_OPTIONS in your top-level Makefile.am file."
- fi
- $ECHO
- fi
- fi
-
- ##################################################
- # make sure certain generated files do not exist #
- ##################################################
- for file in config.guess config.sub ltmain.sh ; do
- if test -f "${_aux_dir}/${file}" ; then
- $VERBOSE_ECHO "mv -f \"${_aux_dir}/${file}\" \"${_aux_dir}/${file}.backup\""
- mv -f "${_aux_dir}/${file}" "${_aux_dir}/${file}.backup"
- fi
- done
-
- ############################
- # search alternate m4 dirs #
- ############################
- SEARCH_DIRS=""
- for dir in m4 ; do
- if [ -d $dir ] ; then
- $VERBOSE_ECHO "Found extra aclocal search directory: $dir"
- SEARCH_DIRS="$SEARCH_DIRS -I $dir"
- fi
- done
-
- ######################################
- # remove any previous build products #
- ######################################
- if test -d autom4te.cache ; then
- $VERBOSE_ECHO "Found an autom4te.cache directory, deleting it"
- $VERBOSE_ECHO "rm -rf autom4te.cache"
- rm -rf autom4te.cache
- fi
-# tcl/tk (and probably others) have a customized aclocal.m4, so can't delete it
-# if test -f aclocal.m4 ; then
-# $VERBOSE_ECHO "Found an aclocal.m4 file, deleting it"
-# $VERBOSE_ECHO "rm -f aclocal.m4"
-# rm -f aclocal.m4
-# fi
-
-} # end of initialize()
-
-
-##############
-# initialize #
-##############
-
-# stash path
-START_PATH="`pwd`"
-
-# Before running autoreconf or manual steps, some prep detection work
-# is necessary or useful. Only needs to occur once per directory, but
-# does need to traverse the entire subconfigure hierarchy to protect
-# files from being clobbered even by autoreconf.
-recursive_protect
-
-# start from where we started
-cd "$START_PATH"
-
-# get ready to process
-initialize
-
-
-#########################################
-# DOWNLOAD_GNULIB_CONFIG_GUESS FUNCTION #
-#########################################
-
-# TODO - should make sure wget/curl exist and/or work before trying to
-# use them.
-
-download_gnulib_config_guess () {
- # abuse gitweb to download gnulib's latest config.guess via HTTP
- config_guess_temp="config.guess.$$.download"
- ret=1
- for __cmd in wget curl fetch ; do
- $VERBOSE_ECHO "Checking for command ${__cmd}"
- ${__cmd} --version > /dev/null 2>&1
- ret=$?
- if [ ! $ret = 0 ] ; then
- continue
- fi
-
- __cmd_version=`${__cmd} --version | head -n 1 | sed -e 's/^[^0-9]\+//' -e 's/ .*//'`
- $VERBOSE_ECHO "Found ${__cmd} ${__cmd_version}"
-
- opts=""
- case ${__cmd} in
- wget)
- opts="-O"
- ;;
- curl)
- opts="-o"
- ;;
- fetch)
- opts="-t 5 -f"
- ;;
- esac
-
- $VERBOSE_ECHO "Running $__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\""
- eval "$__cmd \"${CONFIG_GUESS_URL}\" $opts \"${config_guess_temp}\"" > /dev/null 2>&1
- if [ $? = 0 ] ; then
- mv -f "${config_guess_temp}" ${_aux_dir}/config.guess
- ret=0
- break
- fi
- done
-
- if [ ! $ret = 0 ] ; then
- $ECHO "Warning: config.guess download failed from: $CONFIG_GUESS_URL"
- rm -f "${config_guess_temp}"
- fi
-}
-
-
-##############################
-# LIBTOOLIZE_NEEDED FUNCTION #
-##############################
-libtoolize_needed () {
- ret=1 # means no, don't need libtoolize
- for feature in AC_PROG_LIBTOOL AM_PROG_LIBTOOL LT_INIT ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- ret=0 # means yes, need to run libtoolize
- break
- fi
- done
- return ${ret}
-}
-
-
-
-############################################
-# prepare build via autoreconf or manually #
-############################################
-reconfigure_manually=no
-if [ "x$HAVE_AUTORECONF" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Automatically preparing build ... $ECHO_C"
-
- $VERBOSE_ECHO "$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS"
- autoreconf_output="`$AUTORECONF $SEARCH_DIRS $AUTORECONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoreconf_output"
-
- if [ ! $ret = 0 ] ; then
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- if [ ! "x`echo \"$autoreconf_output\" | grep libtoolize | grep \"No such file or directory\"`" = "x" ] ; then
- $ECHO
- $ECHO "Warning: autoreconf failed but due to what is usually a common libtool"
- $ECHO "misconfiguration issue. This problem is encountered on systems that"
- $ECHO "have installed libtoolize under a different name without providing a"
- $ECHO "symbolic link or without setting the LIBTOOLIZE environment variable."
- $ECHO
- $ECHO "Restarting the preparation steps with LIBTOOLIZE set to $LIBTOOLIZE"
-
- export LIBTOOLIZE
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
- fi
- fi
-
- $ECHO "Warning: $AUTORECONF failed"
-
- if test -f ltmain.sh ; then
- $ECHO "libtoolize being run by autoreconf is not creating ltmain.sh in the auxillary directory like it should"
- fi
-
- $ECHO "Attempting to run the preparation steps individually"
- reconfigure_manually=yes
- else
- if [ "x$DOWNLOAD" = "xyes" ] ; then
- if libtoolize_needed ; then
- download_gnulib_config_guess
- fi
- fi
- fi
-else
- reconfigure_manually=yes
-fi
-
-
-############################
-# LIBTOOL_FAILURE FUNCTION #
-############################
-libtool_failure ( ) {
-
- # libtool is rather error-prone in comparison to the other
- # autotools and this routine attempts to compensate for some
- # common failures. the output after a libtoolize failure is
- # parsed for an error related to AC_PROG_LIBTOOL and if found, we
- # attempt to inject a project-provided libtool.m4 file.
-
- _autoconf_output="$1"
-
- if [ "x$RUN_RECURSIVE" = "xno" ] ; then
- # we already tried the libtool.m4, don't try again
- return 1
- fi
-
- if test -f "$LIBTOOL_M4" ; then
- found_libtool="`$ECHO $_autoconf_output | grep AC_PROG_LIBTOOL`"
- if test ! "x$found_libtool" = "x" ; then
- if test -f acinclude.m4 ; then
- rm -f acinclude.m4.$$.backup
- $VERBOSE_ECHO "cat acinclude.m4 > acinclude.m4.$$.backup"
- cat acinclude.m4 > acinclude.m4.$$.backup
- fi
- $VERBOSE_ECHO "cat \"$LIBTOOL_M4\" >> acinclude.m4"
- chmod u+w acinclude.m4
- cat "$LIBTOOL_M4" >> acinclude.m4
-
- # don't keep doing this
- RUN_RECURSIVE=no
- export RUN_RECURSIVE
- untrap_abnormal
-
- $ECHO
- $ECHO "Restarting the preparation steps with libtool macros in acinclude.m4"
- $VERBOSE_ECHO sh $AUTOGEN_SH "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- sh "$AUTOGEN_SH" "$1" "$2" "$3" "$4" "$5" "$6" "$7" "$8" "$9"
- exit $?
- fi
- fi
-}
-
-
-###########################
-# MANUAL_AUTOGEN FUNCTION #
-###########################
-manual_autogen ( ) {
-
- ##################################################
- # Manual preparation steps taken are as follows: #
- # aclocal [-I m4] #
- # libtoolize --automake -c -f #
- # aclocal [-I m4] #
- # autoconf -f #
- # autoheader #
- # automake -a -c -f #
- ##################################################
-
- ###########
- # aclocal #
- ###########
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $ACLOCAL failed" && exit 2 ; fi
-
- ##############
- # libtoolize #
- ##############
- if libtoolize_needed ; then
- if [ "x$HAVE_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- else
- if [ "x$HAVE_ALT_LIBTOOLIZE" = "xyes" ] ; then
- $VERBOSE_ECHO "$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS"
- libtoolize_output="`$LIBTOOLIZE $ALT_LIBTOOLIZE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$libtoolize_output"
-
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $LIBTOOLIZE failed" && exit 2 ; fi
- fi
- fi
-
- ###########
- # aclocal #
- ###########
- # re-run again as instructed by libtoolize
- $VERBOSE_ECHO "$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS"
- aclocal_output="`$ACLOCAL $SEARCH_DIRS $ACLOCAL_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$aclocal_output"
-
- # libtoolize might put ltmain.sh in the wrong place
- if test -f ltmain.sh ; then
- if test ! -f "${_aux_dir}/ltmain.sh" ; then
- $ECHO
- $ECHO "Warning: $LIBTOOLIZE is creating ltmain.sh in the wrong directory"
- $ECHO
- $ECHO "Fortunately, the problem can be worked around by simply copying the"
- $ECHO "file to the appropriate location (${_aux_dir}/). This has been done for you."
- $ECHO
- $VERBOSE_ECHO "cp -p ltmain.sh \"${_aux_dir}/ltmain.sh\""
- cp -p ltmain.sh "${_aux_dir}/ltmain.sh"
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi
- fi # ltmain.sh
-
- if [ "x$DOWNLOAD" = "xyes" ] ; then
- download_gnulib_config_guess
- fi
- fi # libtoolize_needed
-
- ############
- # autoconf #
- ############
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF $AUTOCONF_OPTIONS"
- autoconf_output="`$AUTOCONF $AUTOCONF_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # retry without the -f and check for usage of macros that are too new
- ac2_59_macros="AC_C_RESTRICT AC_INCLUDES_DEFAULT AC_LANG_ASSERT AC_LANG_WERROR AS_SET_CATFILE"
- ac2_55_macros="AC_COMPILER_IFELSE AC_FUNC_MBRTOWC AC_HEADER_STDBOOL AC_LANG_CONFTEST AC_LANG_SOURCE AC_LANG_PROGRAM AC_LANG_CALL AC_LANG_FUNC_TRY_LINK AC_MSG_FAILURE AC_PREPROC_IFELSE"
- ac2_54_macros="AC_C_BACKSLASH_A AC_CONFIG_LIBOBJ_DIR AC_GNU_SOURCE AC_PROG_EGREP AC_PROG_FGREP AC_REPLACE_FNMATCH AC_FUNC_FNMATCH_GNU AC_FUNC_REALLOC AC_TYPE_MBSTATE_T"
-
- macros_to_search=""
- ac_major="`echo ${AUTOCONF_VERSION}. | cut -d. -f1 | sed 's/[^0-9]//g'`"
- ac_minor="`echo ${AUTOCONF_VERSION}. | cut -d. -f2 | sed 's/[^0-9]//g'`"
-
- if [ $ac_major -lt 2 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- else
- if [ $ac_minor -lt 54 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros $ac2_54_macros"
- elif [ $ac_minor -lt 55 ] ; then
- macros_to_search="$ac2_59_macros $ac2_55_macros"
- elif [ $ac_minor -lt 59 ] ; then
- macros_to_search="$ac2_59_macros"
- fi
- fi
-
- configure_ac_macros=__none__
- for feature in $macros_to_search ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- if [ "x$configure_ac_macros" = "x__none__" ] ; then
- configure_ac_macros="$feature"
- else
- configure_ac_macros="$feature $configure_ac_macros"
- fi
- fi
- done
- if [ ! "x$configure_ac_macros" = "x__none__" ] ; then
- $ECHO
- $ECHO "Warning: Unsupported macros were found in $CONFIGURE"
- $ECHO
- $ECHO "The `basename \"$CONFIGURE\"` file was scanned in order to determine if any"
- $ECHO "unsupported macros are used that exceed the minimum version"
- $ECHO "settings specified within this file. As such, the following macros"
- $ECHO "should be removed from configure.ac or the version numbers in this"
- $ECHO "file should be increased:"
- $ECHO
- $ECHO "$configure_ac_macros"
- $ECHO
- $ECHO $ECHO_N "Ignorantly continuing build preparation ... $ECHO_C"
- fi
-
- ###################
- # autoconf, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOCONF"
- autoconf_output="`$AUTOCONF 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoconf_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$autoconf_output"
-
- # let the user know what went wrong
- cat <<EOF
-$autoconf_output
-EOF
- $ECHO "ERROR: $AUTOCONF failed"
- exit 2
- else
- # autoconf sans -f and possibly sans unsupported options succeed so warn verbosely
- $ECHO
- $ECHO "Warning: autoconf seems to have succeeded by removing the following options:"
- $ECHO " AUTOCONF_OPTIONS=\"$AUTOCONF_OPTIONS\""
- $ECHO
- $ECHO "Removing those options should not be necessary and indicate some other"
- $ECHO "problem with the build system. The build preparation is highly suspect"
- $ECHO "and may result in configuration or compilation errors. Consider"
- if [ "x$VERBOSE_ECHO" = "x:" ] ; then
- $ECHO "rerunning the build preparation with verbose output enabled."
- $ECHO " $AUTOGEN_SH --verbose"
- else
- $ECHO "reviewing the minimum GNU Autotools version settings contained in"
- $ECHO "this script along with the macros being used in your `basename \"$CONFIGURE\"` file."
- fi
- $ECHO
- $ECHO $ECHO_N "Continuing build preparation ... $ECHO_C"
- fi # autoconf ret = 0
- fi # autoconf ret = 0
-
- ##############
- # autoheader #
- ##############
- need_autoheader=no
- for feature in AM_CONFIG_HEADER AC_CONFIG_HEADER ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_autoheader=yes
- break
- fi
- done
- if [ "x$need_autoheader" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOHEADER $AUTOHEADER_OPTIONS"
- autoheader_output="`$AUTOHEADER $AUTOHEADER_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$autoheader_output"
- if [ ! $ret = 0 ] ; then $ECHO "ERROR: $AUTOHEADER failed" && exit 2 ; fi
- fi # need_autoheader
-
- ############
- # automake #
- ############
- need_automake=no
- for feature in AM_INIT_AUTOMAKE ; do
- $VERBOSE_ECHO "Searching for $feature in $CONFIGURE"
- found="`grep \"^$feature.*\" $CONFIGURE`"
- if [ ! "x$found" = "x" ] ; then
- need_automake=yes
- break
- fi
- done
-
- if [ "x$need_automake" = "xyes" ] ; then
- $VERBOSE_ECHO "$AUTOMAKE $AUTOMAKE_OPTIONS"
- automake_output="`$AUTOMAKE $AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
-
- ###################
- # automake, retry #
- ###################
- $VERBOSE_ECHO
- $VERBOSE_ECHO "$AUTOMAKE $ALT_AUTOMAKE_OPTIONS"
- # retry without the -f
- automake_output="`$AUTOMAKE $ALT_AUTOMAKE_OPTIONS 2>&1`"
- ret=$?
- $VERBOSE_ECHO "$automake_output"
-
- if [ ! $ret = 0 ] ; then
- # test if libtool is busted
- libtool_failure "$automake_output"
-
- # let the user know what went wrong
- cat <<EOF
-$automake_output
-EOF
- $ECHO "ERROR: $AUTOMAKE failed"
- exit 2
- fi # automake retry
- fi # automake ret = 0
- fi # need_automake
-} # end of manual_autogen
-
-
-#####################################
-# RECURSIVE_MANUAL_AUTOGEN FUNCTION #
-#####################################
-recursive_manual_autogen ( ) {
-
- # run the build preparation steps manually for this directory
- manual_autogen
-
- # for projects using recursive configure, run the build
- # preparation steps for the subdirectories.
- if [ ! "x$CONFIG_SUBDIRS" = "x" ] ; then
- $VERBOSE_ECHO "Recursively configuring the following directories:"
- $VERBOSE_ECHO " $CONFIG_SUBDIRS"
- for dir in $CONFIG_SUBDIRS ; do
- $VERBOSE_ECHO "Processing recursive configure in $dir"
- cd "$START_PATH"
- cd "$dir"
-
- # new directory, prepare
- initialize
-
- # run manual steps for the subdir and any others below
- recursive_manual_autogen
- done
- fi
-}
-
-
-################################
-# run manual preparation steps #
-################################
-if [ "x$reconfigure_manually" = "xyes" ] ; then
- $ECHO
- $ECHO $ECHO_N "Preparing build ... $ECHO_C"
-
- recursive_manual_autogen
-fi
-
-
-#########################
-# restore and summarize #
-#########################
-cd "$START_PATH"
-
-# restore COPYING and INSTALL from backup if necessary
-recursive_restore
-
-# make sure we end up with a configure script
-config_ac="`locate_configure_template`"
-config="`echo $config_ac | sed 's/\.ac$//' | sed 's/\.in$//'`"
-if [ "x$config" = "x" ] ; then
- $VERBOSE_ECHO "Could not locate the configure template (from `pwd`)"
-fi
-
-# summarize
-$ECHO "done"
-$ECHO
-if test "x$config" = "x" -o ! -f "$config" ; then
- $ECHO "WARNING: The $PROJECT build system should now be prepared but there"
- $ECHO "does not seem to be a resulting configure file. This is unexpected"
- $ECHO "and likely the result of an error. You should run $NAME_OF_AUTOGEN"
- $ECHO "with the --verbose option to get more details on a potential"
- $ECHO "misconfiguration."
-else
- $ECHO "The $PROJECT build system is now prepared. To build here, run:"
- $ECHO " $config"
- $ECHO " make"
-fi
-
-
-# Local Variables:
-# mode: sh
-# tab-width: 8
-# sh-basic-offset: 4
-# sh-indentation: 4
-# indent-tabs-mode: t
-# End:
-# ex: shiftwidth=4 tabstop=8
diff --git a/src/Makefile.am b/src/Makefile.am
deleted file mode 100755
index 5ce956d59d613dc1da85a457499b7e5f4a0354d0..0000000000000000000000000000000000000000
--- a/src/Makefile.am
+++ /dev/null
@@ -1,48 +0,0 @@
-
-if BUILDCUDA
- CUDA_SOURCES=memory/CudaMemory.cu
-else
- CUDA_SOURCES=
-endif
-
-LINKLIBS = $(PTHREAD_LIBS) $(OPT_LIBS) $(BOOST_LDFLAGS) $(BOOST_PROGRAM_OPTIONS_LIB) $(CUDA_LIBS) $(BOOST_THREAD_LIB)
-
-LIBTOOL_DEPS = @LIBTOOL_DEPS@
-libtool: $(LIBTOOL_DEPS)
- $(SHELL) ./config.status libtool
-
-noinst_PROGRAMS = mem
-mem_SOURCES = main.cpp memory/HeapMemory.cpp $(CUDA_SOURCES) Memleak_check.cpp
-mem_CXXFLAGS = $(INCLUDES_PATH) $(BOOST_CPPFLAGS) -I/usr/local/include
-mem_CFLAGS =
-mem_LDADD = $(LINKLIBS) -L/usr/lib64/nvidia-bumblebee/
-
-lib_LIBRARIES = libofpmmemory.a libofpmmemory_se2.a
-libofpmmemory_a_SOURCES = memory/HeapMemory.cpp $(CUDA_SOURCES) memory/PtrMemory.cpp Memleak_check.cpp
-libofpmmemory_a_CXXFLAGS = $(INCLUDES_PATH) $(BOOST_CPPFLAGS) -I/usr/local/include
-libofpmmemory_a_CFLAGS =
-
-libofpmmemory_se2_a_SOURCES = memory/HeapMemory.cpp $(CUDA_SOURCES) memory/PtrMemory.cpp Memleak_check.cpp
-libofpmmemory_se2_a_CXXFLAGS = $(INCLUDES_PATH) $(BOOST_CPPFLAGS) -I/usr/local/include -DSE_CLASS2
-libofpmmemory_se2_a_CFLAGS =
-
-lib_LTLIBRARIES = libofpmmemory.la libofpmmemory_se2.la
-libofpmmemory_la_SOURCES = memory/HeapMemory.cpp $(CUDA_SOURCES) memory/PtrMemory.cpp Memleak_check.cpp
-libofpmmemory_la_CXXFLAGS = $(INCLUDES_PATH) $(BOOST_CPPFLAGS) -I/usr/local/include
-libofpmmemory_la_CFLAGS =
-
-libofpmmemory_se2_la_SOURCES = memory/HeapMemory.cpp $(CUDA_SOURCES) memory/PtrMemory.cpp Memleak_check.cpp
-libofpmmemory_se2_la_CXXFLAGS = $(INCLUDES_PATH) $(BOOST_CPPFLAGS) -I/usr/local/include -DSE_CLASS2
-libofpmmemory_se2_la_CFLAGS =
-
-
-nobase_include_HEADERS = memory/ExtPreAlloc.hpp memory/BHeapMemory.hpp memory/HeapMemory.hpp memory/memory.hpp memory/PtrMemory.hpp \
-Memleak_check.hpp util/print_stack.hpp ptr_info.hpp \
-util/se_util.hpp
-
-.cu.o :
- $(NVCC) $(NVCCFLAGS) -std=c++11 -I. $(INCLUDES_PATH) -o $@ -c $<
-
-test: mem
- source $(HOME)/openfpm_vars && cd .. && ./src/mem
-